Using a plumb bob with prism12/10/2023 By taking two readings at the same level any curvature on the surface can be identified. Take the readings of two positions at the same level on both top and bottom levels of the formwork.Take the reading of the steel tape through the telescope.After Theodolite set up accurately the laser beam will be turned on and focused it to the steel tape which is held to the formwork.Setting up the digital Theodolite centered on a peg that installed 500 mm from the column grid.The procedure used to check column verticality includes: It is possible to measure the slope of out of plumb line of the member by using Theodolite in combination with a tape. It is suitable for checking or controlling verticality of towers as shown in Figure 8, wall, foundation and columns as shown in Figure 9 specifically large number of columns along a one grid line. Theodolite is substantially powerful instrument which can be used to check verticality works during construction with great precision and accuracy. If spirit level is employed for approximate checks, then it is required to check the verticality with more accurate technique. This tool is appropriate for controlling verticality of small scale works for example checking formworks and door frames. If the height of structural member is large, then it is possible to replace the string with a long wire, but substantial cautions should be plasticized so as to avoid imposing risks to the personals working below. Small to moderate lateral movement of plumb-bob can be reduced satisfactorily by damping it in oil or water. The plumb line or vertical line of plumb-bob is influenced by wind force and it will lose its accuracy and precision. Added to that, it is used to control verticality of foundation, walls, and columns.įig.3: Checking Verticality of Structural Elements This method is applied for checking or controlling vertical line of structural elements especially indoors such as lift shaft. The heavy weight will hang under gravity and offer a precise vertical line which is called plumb line. ![]() Plumb-bob as shown in Figure 2 consist of a weight with pointed tip on the bottom attached to end of a string. Methods used to check or control verticality works include: ![]() Various methods which to control or check verticality works during building construction are discussed.įig.1: Verticality Works During Building Construction Methods to Control Verticality of Structure during Building Construction □ Reading time: 1 minuteChecking verticality works would encounter during building construction at several stages such as during installing vertical formworks of columns and transferring levels up successive floors of multi storey structures.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |